MAINTENANCE
REPLACING THE ROTOR
(See Figures 10-13)
• Remove the 4 screws that secure the right side cover to the frame of the Snow Thrower (Fig. 10).
• Remove the short shaft (Fig. 11).
• Push the sides of the housing out, as illustrated in Figure 12 and remove the rotor (Fig. 13).
• Install the new rotor, and reinstall the clip.
• Reinstall the right side cover, and secure it using the 4 screws.
19
Fig. 10
Fig. 12
Fig. 11
Fig. 13
Short shaft
Right side
cover
Screw
