background image

6

Some of the following symbols may be used on this product. Please study them and learn their 
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS

  SYMBOL  NAME 

DESIGNATION/EXPLANATION

 

Volts 

Voltage

 

Amperes 

Current

 

Hz 

Hertz 

Frequency (cycles per second)

 

Watt 

Power

 

min 

Minutes 

Time

 

 

Alternating Current 

Type of current

 

 

Direct Current 

Type or a characteristic of current

Wet Conditions Alert 

Do not expose to rain or use in damp locations

 

 

Read The Operator’s Manual 

To reduce the risk of injury user must read and 

 

 

 

understand operator’s manual before using this  

 

 

 

product.

 

 

Safety Alert 

Precautions that involve your safety.

 

 

Keep Bystanders Away 

Keep all bystanders at least 50 ft. away.

 

 

Eye Protection 

Always wear safety goggles or safety glasses  

 

 

 

with side shields and, as necessary, a full face  

 

 

 

shield when operating this product.

 

 

Ricochet 

Thrown objects can ricochet and result in  

 

 

 

personal injury or property damage.

Sharp Blade    

Do not install or use any type of blade on a  
product displaying this symbol. 

Gloves

Wear non-slip, heavy duty gloves.

Summary of Contents for 22232






















Reviews: