GreenWorks 22032, Owner'S Manual

Page: 14 / 22

14
BATTERY CHARGER
W A R N I N G
If the battery is inserted into the charger when warm or hot the CHECK BATTERY indicator light
may switch on. If this occurs allow the battery to cool outside of the charger for 30 minutes.
CHARGER MAINTENANCE
• Keep the charger clean and clear of debris. Do not allow foreign material into the recessed
cavity or on the contacts. Wipe with a dry cloth. Do not use solvents, water, or place in wet
conditions.
• Always unplug the charger when there is no battery pack in it.
• Give the batteries a full charge before placing in storage. Do not recharge a fully charged
battery pack. Overcharging shortens the battery life.
• Recharge the battery pack anytime you notice there is less power. Never let the batteries
become completely discharged.
• Keep the charger stored in normal room temperature. Do not store it in excessive heat. Do
not use in direct sunlight. Always recharge in a room temperature of 50˚F to 100˚F . If the
battery pack is hot, let it cool down before recharging.
• Disconnect the charger from the AC power outlet when not in use and once battery has
reached a full charge.
CHARGER MOUNTING
1. This charger can be installed hanging on a wall using two screws (not supplied)
2. Locate the placement for the charger to be wall mounted.
3. If fastening to wood studs use 2 wood screws.
4. Drill two holes 2 3/8" on center. Ensure they are level.
5. If fastening to drywall use wall anchors and screws to secure the charger to the wall.
Fig. 6
(See Figure 6.)