GreenWorks 20612 Owner'S Manual Download Page 9

9

UNPACKING 

This product has been shipped completely assembled. 

• 

Carefully  remove  the  product  and  any  accessories  from  the  box.  Make  sure  that  all  items 
listed in the packing list are included. 

• 

Inspect the product carefully to make sure no breakage or damage occurred during shipping. 

• 

Do  not  discard  the  packing  material  until  you  have  carefully  inspected  and  satisfactorily 
operated the product. 

• 

If any parts are damaged or missing, please call 1-888-909-6757 for assistance. 

PACKING LIST 

• 

Pole saw 

• 

Scabbard

• 

Owner's Manual 

W A R N I N G

If  any  parts  are  damaged  or  missing,  do  not  operate  this  product  until  the  parts  are  replaced. 

Failure to heed this warning could result in serious personal injury. 

W A R N I N G

Do not attempt to modify this product or create accessories not recommended for use with this 

product. Any such alteration or modification is misuse and could result in a hazardous condition 

leading to possible serious personal injury. 

W A R N I N G

Do not fit on the battery until assembly is complete. Failure to comply could result in accidental 

starting and possible serious personal injury. 

ASSEMBLY INSTRUCTIONS

Summary of Contents for 20612





































Reviews: