manualshive.com logo in svg

GreenWorks 20062, Owner'S Manual

Share
Download
GreenWorks 20062 Owner'S Manual Download Page 9

9

ELECTRICAL

W A R N I N G

TO AVOID  ELECTRICAL  HAZARDS,  FIRE  HAZARDS,  OR  DAMAGE  TO  THE  TOOL,  USE 
PROPER CIRCUIT PROTECTION. THIS CHAINSAW IS WIRED AT THE FACTORYFOR 120 V 
OPERATION. CONNECT TO A 120 V, 15 A CIRCUIT, AND USE A 15 A TIME-DELAYED FUSE 
OR CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE WHEN THE POWER CORD IS WORN, 
CUT, OR DAMAGED IN ANY WAY, REPLACE IT IMMEDIATELY.

DOUBLE INSULATION

The  pole  saw  is  double  insulated  to  provide  a  double  thickness  of  insulation  between  you  and 
the  tool’s  electrical  system.  All  exposed  metal  parts  are  isolated  from  the  internal  metal  motor 
components with protective insulation.

W A R N I N G

TO AVOID INJURY, USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING THE 
POLE SAW.

W A R N I N G

DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY PRECAUTIONS 
WHEN OPERATING THIS TOOL.

W A R N I N G

TO AVOID ELECTRIC SHOCK: 

1. Use only identical replacement parts when servicing a tool with double insulation. 

Servicing should be performed by a qualified technician. 

2. Do not use in wet or damp areas or expose to rain. 

GROUNDING INSTRUCTIONS (See Fig. 1)

IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least 
resistance for electric current, and reduces the risk of electric shock. This tool is equipped with 
a power cord that has a POLARIZED plug.The power cord MUST be plugged into a matching 
outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. 

DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet 

installed by a qualified electrician.

C A U T I O N

IN  ALL  CASES,  MAKE  CERTAIN  THE  RECEPTACLE  IN  QUESTION  IS  PROPERLY 
GROUNDED.  IF  YOU ARE  NOT  SURE,  HAVE A  CERTIFIED  ELECTRICIAN  CHECK  THE 
RECEPTACLE.

SAVE THESE INSTRUCTIONS

Summary of Contents for 20062





































Reviews:

No comments

Brands by name

Popular brands

Load more brands