GreenWorks 1500 PSI User Manual Download Page 11

11

KNOW YOUR PRESSURE WASHER

The safe use of this product requires an understanding of the information on the tool and in this 

operator’s manual as well as a knowledge of the project you are attempting. Before use of this 

product, familiarize yourself with all operating features and safety rules. (

See Figure 2.)

Fig. 2

DETERGENT TANK

 

Remove the cap from the detergent tank to add detergent to the pressure washer. 

GFCI PLUG

The pressure washer is equipped with a GFCI plug to guard against the hazards of ground fault 

currents. This plug does not protect against short circuits, overloads, or shocks.

HIGH PRESSURE HOSE STORAGE REEL

 

Once the high pressure hose is rolled, hang it on the top of the machine using the hook-and-loop 

strap to secure in place.

ON / OFF SWITCH

 

This switch turns the pressure washer on and off. 

TRIGGER HANDLE

 

The trigger handle has a gripping surface that provides added control of the spray wand and 

helps reduce fatigue.

TRIGGER WITH LOCK-OUT

 

Pulling the trigger releases a stream of water for high pressure cleaning. The lock-out provides 
protection against unauthorized use.

UNPACKING

This product requires assembly.

■ Carefully remove the product and any accessories from the box. Make sure that all items listed    

in the packing list are included.

Spray wand

High pressure hose

Wheels

High pressure hose storage hook

Electric cord storage hook 

Gun storage hook

Electric cord hook

On/Off switch

Water intake

Trigger

Detergent tank

Handle assembly

Nozzle

Summary of Contents for 1500 PSI
































Reviews: