ASSEMBLY
13
ATTACHINg THE AuXILIARY HANDLE
(See
Figure 5.
)
1. Press the auxiliary handle (1) onto the upper shaft so that the handle is angled toward the
rear handle that allows for comfortable operation.
2.
Slide the auxiliary handle over the metal ring (2) and ensure the metal ring fits between
the slot on the auxiliary handle.
2
1
Fig. 5.1
3. Align the holes on the auxiliary handle with the holes on metal ring.
4. Insert the handle knob (3) through the auxiliary handle.
3
Fig. 5.2
5. Tighten until there is no movement in the handle.
Fig. 5.3
