9
TROUBLESHOOTING
Problem
Possible cause
Solution
The handle is not
in position.
The bolts are not
engaged correctly.
Adjust the height
of the handle and
make sure that the
knobs and bolts
are aligned cor-
rectly.
The machine does
not start.
The battery is not
charged.
Charge the battery
by following the
procedures in the
battery and charg-
er manual.
The switch is de-
fective.
Have the switch
replaced by an au-
thorized service
center.
Battery is too cold. Remove battery
from snow throw-
er. Place battery on
charger and allow
to charge for 10
minutes or until
the changing light
turns green. Re-
move from charger
and install in snow
thrower for use.
Battery may re-
quire service or re-
placement.
Call toll free help-
line, at
1-855-345-3934 or
replace battery.
The engine is on,
but the impeller
does not turn.
The belt is dam-
aged.
Replace the belt.
A thin layer of
snow stays behind.
The scraper is
damaged.
Replace the scra-
per.
* If you cannot find the solution to these problems, call
1-855-345-3934 .
10
TECHNICAL DATA
Voltage
60 V
No load speed
1800 RPM
Clearing width
22 in
Clearing depth
13 in
Impeller size
18 in
Weight (without battery pack) 56.9 lbs (25.8 kg)
Battery
LB604 and other BAC
Series
Charger
CAC801 and other CAC
Series
The recommended ambient temperature range:
e
r
u
t
a
r
e
p
m
e
T
m
e
t
I
Snow Thrower storage tem-
perature range
Snow Thrower operation
temperature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery discharging tempera-
ture range
Battery storage temperature
range
11
LIMITED WARRANTY
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
12
English
EN
TOOL WARRANTY
YEAR/AÑOS
GARANTÍA DE LA
HERRAMIENTA
Summary of Contents for SN60L02
