background image

SAVE THESE INSTRUCTIONS

88

SAFETY INFORMATION

W A R N I N G

When transporting or servicing unit, always remove the battery.

W A R N I N G ( P R O P O S I T I O N   6 5 )

Some dust created by power sanding, sawing, grinding, drilling and other construction activities 

contains chemicals known to the state of California to cause cancer, birth defects or other 

reproductive harm. Some examples of these chemicals are: 

• Lead from lead-based paints, 

• Crystalline silica from bricks and cement and other masonry products,  

• Arsenic and chromium from chemically-treated lumber. 

Your risk from these exposures varies depending on how often you do this type of work. To 

reduce your exposure to these chemical: work in a well ventilated area, and work with approved 

safety equipment, such as those dust masks that are specially designed to filter out microscopic 

particles.

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified 

service technician. For service we suggest you return the product to your nearest 

AUTHORIZED 

SERVICE CENTER

  for repair. When servicing, use only identical replacement parts.

Summary of Contents for MO60L410




































Reviews: