8.7
SET THE BLADE HEIGHT
The machine can be set to different blade heights.
1. Pull the height adjustment lever (7) rearward to increase
the blade height.
2. Pull the height adjustment lever forward to decrease the
blade height.
8.8
INSTALL THE BATTERY PACK
WARNING
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
•
Read, know, and follow the instructions in the battery
and charger manual.
1. Open the battery door (8).
2. Align the lift ribs on the battery pack (25) with the
grooves in the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
NOTE
The motor starts only when you put in the safety key (26).
8.9
REMOVE THE BATTERY PACK
1. Open the battery door (8).
2. Remove the safety key (26).
3. Push and hold the battery release button (24).
4. Remove the battery pack (25) from the machine.
9
OPERATION
WARNING
Wear eye protection during operation.
9.1
START THE MACHINE
1. Push and hold the start button (1).
2. While you hold the start button (1), pull the bail switch
(4) in the direction of the handle bar.
3. Once the machine has started you can release the start
button (1).
10
English
EN
Summary of Contents for LMB408
Page 2: ......
