1
DESCRIPTION
1.1
PURPOSE
This machine is used for domestic lawn mowing. The cutting
blade must be approximately parallel to the ground. All four
wheels must touch the ground while you mow.
1.2
OVERVIEW
Figure 1 - 12.
1
Handle knob
2
Lower handle
3
Upper handle
4
Knob
5
Bolt
6
Grass catcher
7
Rear discharge door
8
Mulch plug
9
Side discharge chute
10
Side discharge door
11
Height adjustment lever
12
Battery door
13
Battery pack
14
Safety key
15
Battery release button
16
Start button
17
Bail switch
18
Self-propel lever
19
Speed control button
20
Wrench
21
Mounting screw
22
Blade
23
Wood
24
Hook
25
Door rod
26
Pivot
27
Recesses
28
Mulch plug handle
29
Grass catcher handle
2
SAFETY
WARNING
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3
INSTALLATION
WARNING
Do not change or make accessories that are not
recommended by the manufacturer.
WARNING
Do not put in the safety key or the battery pack until you
assemble all the parts.
3.1
UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
•
If the parts are damaged, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.2
UNFOLD THE LOWER HANDLE
Figure 2.
1. Pull and turn the handle knobs 90°.
2. Unfold the lower handle.
3. Line up the handle knobs in one of the three positions on
the brackets.
4. Turn the handle knobs 90° until they engage the holes in
the brackets.
NOTE
Make sure that the two handle knobs are in the same
position.
WARNING
Do not make damage to the cables when you fold or unfold
the handle.
3.3
INSTALL THE UPPER HANDLE
Figure 3.
1. Align the holes in the upper handle and the lower handle.
4
English
EN