7
MAINTENANCE
7.1
CLEAN THE MACHINE
NOTE
Keep the air vent free of blockage, saw dust, and wood dust.
Do not spray, wash, or put the air flow in water.
•
Clear the unwanted material out of the air vent with a
vacuum.
•
Clean housing and the plastic components with a dry and
soft cloth.
IMPORTANT
Do not use strong solvents or detergents on the plastic
housing or components.
7.2
STOW THE MACHINE
•
Remove the battery pack before you store the charger or
disconnect the charger.
8
TROUBLESHOOTING
PROBLEM
POSSIBLE
CAUSE
SOLUTION
Charger doesn't
work. Charger
shows defective
mode. (LED
flashes Red)
Battery pack or
charger is defective
or there is a bad
connection be-
tween the battery
pack and charger.
Try to remove and
reinsert the battery
pack in the charg-
er.
Try charging a dif-
ferent battery
pack.
Unplug the charg-
er and wait until
the red LED goes
out, then reconnect
the plug to the
power supply.
Charger doesn't
work. Charger
shows evaluation
mode (LED indi-
cates Red solid
ON).
Battery pack is ei-
ther too hot, or too
cold.
Allow the battery
pack to reach nor-
mal temperature.
Charging will be-
gin when the bat-
tery pack returns
to 3°C-47°C
(37°F-117°F).
9
TECHNICAL DATA
Model
60DPC10A
Voltage
60 V
Input
120V AC 50/60Hz, 10A Max
Output
60V DC 10A
Charge time
30min. (1 Battery)/ 30min.
(2 Batteries)
(use LB602
Battery)
37.5min. (1 Battery)/
37.5min. (2 Batteries)
(use LB6025
Battery)
45min. (1 Battery)/ 45min.
(2 Batteries)
(use LB603
Battery)
40min. (1 Battery)/ 48min.
(2 Batteries)
(use LB604
Battery)
50min. (1 Battery)/ 60min.
(2 Batteries)
(use LB605
Battery)
60min. (1 Battery)/ 72min.
(2 Batteries)
(use LB606
Battery)
6
English
EN
