1
2
3
11.2
STOP THE MACHINE
1. Release the trigger to stop the machine.
NOTE
Wait until the motor stops after you stop the machine.
11.3
CRUISE CONTROL LEVER
1. Pull the cruise control lever (2) clockwise to increase the
speed. This will lock the speed at the desired setting.
2. Push the cruise control lever counter clockwise to
decrease the speed.
1
2
3
NOTE
If you decrease the speed all the way, the unit will stop and
it is necessary to start the machine again.
11.4
TURBO BUTTON
1. Push the turbo button (1), the machine is at the highest
speed.
2. Release the turbo button, the machine is at the normal
speed.
11.5
OPERATE THE MACHINE
1. Hold the machine tightly with one hand.
2. Blow from side to side with the nozzle above the ground.
3. Move forward slowly.
NOTE
Keep the unwanted materials in front of you
NOTE
Move heavier materials at a high speed while lighter
materials at a low speed.
11.6
OPERATION TIPS
•
Blow around the outer edge of the unwanted materials to
prevent the unwanted materials from scattering.
•
Use rakes and brooms to clear the unwanted material
before you blow.
•
Make the surfaces wet before you clear the unwanted
material in dusty conditions.
•
Look out for children, pets, open windows, and cleaned
cars during operation.
•
Clean the machine.
•
Discard the unwanted material when you complete work.
12
MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
12.1 CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
9
English
EN
