GreenWorks Commercial 2936202, Operator'S Manual, Page: 6 / 32

10 INSTALLATION
10.1 CONNECT THE ADAPTER
1. Connect the plug (1) to the socket (2).
2. Turn clockwise the plug (1) to secure.
3. Connect the plug (3) to the socket (4).
4. Turn clockwise the plug (3) to secure.
NOTE
Pull the lock button (5) to release the cable plug.
10.2 CHARGE THE BACKPACK
BATTERY
1. Connect on end of the adapter to the backpack battery.
2. Connect the other and of the adapter to the battery pack.
3. Plug the charger into an AC power outlet.
10.3 PUT ON THE BACKPACK
1. The backplate is fastened to the hip belt through the
pocket in the back.
2. The shoulder straps are attached to the D-rings at the back
of the hip belt.
10.4 ADJUST THE BACKPACK
HARNESS
10.4.1 INSTALL THE HARNESS
• Pull the ends of the straps downward to tighten the
harness.
• Lift the tabs of the adjusters to loosen the straps.
• Close and lock the quick-release fastener by pushing it
together.
• Squeeze the hooks to open the quick-release fastener.
6
English
EN