ASSEMBLY INSTRUCTIONS
Pedal Crank Arm
Pedal
Hexagonal Key
Mirror
Nut
side of the (your left side as if seated on the
). The inside surface of the crank arms are labeled "L" and "R" like the pedals. The
Left pedal has reverse threading meaning it tightens by turning it to the left (counter-clockwise).
The Right pedal has normal threading and tightens by turning it to the right (clockwise). After
threading the pedals into the crank arms as far as possible with your fingers (to avoid cross
threading), tighten them snugly with an adjustable wrench.
REARVIEW MIRRORS
After unpacking your there is minimal assembly to be completed. Assembly
consists of attaching the pedals to the and attaching the rearview mirrors.
PEDALS
Locate Pedals (Set of 2) The pedals are labeled
left and right near the threads. They are not
interchangeable. The left pedal goes into the
threaded hole on the left crank arm on the left
You have now successfully assembled your !
If you have any questions about assembly please call :
Greenwit Customer Service / Technical Support
Toll-Free at 1-888-331-0555 Thu - Sun 11-am - 6pm PST.
Locate the chrome mirrors included with your .
These have threaded ends and include a nut. With the
Hexagonal ("Allen" or "Hex" wrench) remove the screw and
nut as shown in the pictures. Once the nut is removed from
the threaded end of each mirror, insert the threaded end of
the mirror as shown on picture at left. Then screw the nut onto
the mirror's threaded end as shown on picture below.
The mirror needs to be
tightened fully for assembly
to be safe. Repeat the
process for the other mirror.
Once mirrors are installed,
they should look like the
picture on left. Make sure to
adjust the mirrors before
use so that you can see
behind you as you ride.
8
MOTORINO
TM
MOTORINO
TM
MOTORINO
TM
MOTORINO
TM
MOTORINO
TM
