USER INSTRUCTIONS
1.
Any repairs to this appliance should be carried out by qualified/authorized service personnel only.
2.
Under no circumstances should this appliance be modified Parts having to be removed for servicing
must be replaced with original “OEM” (original equipment manufacturers) parts only.
3.
This firebox is to be cleaned with a damp cloth (water) only.
IMPORTANT:
Always unplug the power cord before cleaning the unit. Do not use any abrasive cleaners
on the unit.
4.
Please unplug this firebox when not in use.
Grounding Instructions
This heater is for use on 120 volts. The cord has a plug as shown
in figure 1A in the diagram. An adapter as shown in figure 1C is
available for connecting three-blade grounding-type plugs to two-slot
receptacles. The green grounding lug extending from the adapter must
be connected to a permanent ground such as a properly grounded
outlet box. The adapter should not be used if a three-slot grounded
receptacle is available.
Locating Your Fireplace
When choosing a location for your new fireplace, ensure the general
instructions are followed. Also, for best effect install the fireplace out
of direct sunlight.
It is safe to set the fireplace insert close to non-combustibles.
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
Mantel Installation
Please refer to the detailed instructions that come with the mantel that you purchased.
Specifications
GFBC28WSFI
Fireplace Insert dimensions
(w x d x h)
29” x 11.2” x 19.7"
73.6cm x 28.5cm x 50.1cm
Gross Weight
46.5 lbs / 21.1 kg
Voltage
120 V
Frequency
60 Hz
Watts / Amps.
1400 W / 11.6 A
Heater Rating
1400W / 4770 BTU's
Electrical Connection
A 15 Amp, 120 Volt, 60 Hz circuit with a properly grounded outlet is required to operate this appliance.
Preferably, the fireplace insert will be on a dedicated circuit as other appliances on the same circuit
2
Fig. 1
Grounding Pin
Cover of Grounded Outlet Box
Adapter
Grounding Lug
Metal Screw
Cover of Grounded Outlet Box
A
B
C
