8
OPERATING INSTRUCTIONS
Timer Button
•
The timer button should be used to set the countdown for the unit's main power.
•
If the unit is powered OFF, you can press the timer button to power ON the unit. The emberbed
will glow at the lowest brightness setting unless a different setting was saved in the memory.
•
Press the timer button again to scroll through the timer settings, which are: 30, 1h, 2h, 3h, 4h, 5h,
6h, 7h, 8h, 9h and OFF.
•
When the timer reaches zero, it will turn OFF the main power and will maintain the settings in
memory.
Memory Function
•
When the unit is powered OFF, all function settings (excluding timer) will be saved.
•
When the unit is OFF, pressing the power button once on the insert control panel or on the remote
control will turn the unit ON and "wakeup" the saved function settings.
•
When the unit is OFF, press any function button to "wakeup" the individual function at the last
saved setting. Press the button again to adjust it and press the main power button on the insert or
on the remote control to turn the unit OFF and save the new setting into memory.
•
When the unit is powered ON, the LED readout will show the saved temperature setting. If a temper
-ature setting was not saved, it will show the flame brightness setting saved in memory. If neither
one has a setting saved to memory, then only the emberbed will glow (as a power light indicator).
•
To reset the memory, hold down the main power button for 5 seconds at any time. When this
happens, the LED readout will blink with four zeros three times.
•
Another way to reset the memory is to unplug the unit from the wall.
To use the remote control,
first remove the plastic tab
by gently pullling.
HEATER OVERRIDE
The power to the heater can be disengaged to prevent the heater from being accidentally or
unintentionally powered on. This feature is primarily added to help prevent children from powering
on the heater when it is not desired.
•
To engage the heater override function press and hold the Temperature button for 10 seconds.
locked. If the heater incon is pressed again E3 will appear then fade. The Flame, Downlight and
•
To unlock the heater function, press and hold the Temperature button for 10 seconds. The symbol
E3 will display and then go blank while beeping 3 times. The heater function is now engaged.
By pressing the Temperature button again you will be able to adjust the heat temperature to your
desired temperature.
The symbol E3 will display and then go blank while beeping 3 times. The heater function is now
Timer functions will operate normally. Only the heater and blower are disengaged.