5
ELECTRICAL FIREPLACE ASSEMBLY INSTRUCTIONS
3. Insert four wooden dowels (CC) into holes on
base (L). Place assembly from step 2 onto base (L),
securing with four washers (BB) and four long
bolts (AA).
Hardware Used
BB
CC
Long Bolt
x 4
x 4
Washer
AA
x 4
Wooden Dowel
2. Insert two wooden dowels (CC) into each side of
center panel (B). Align the wooden dowels in center
panel (B) to left middle wall (C) and right middle
wall (D). Insert wooden dowels into predrilled holes
and press tight.
1. Place base (L) to upside down onto a scratch free
surface such as a foam sheet that came in the
packaging. Screw on the center support leg (H) to the
center hole on the bottom of the base (L). Align two
foot (W) with the W foot location on the base, securing
with eight washers (BB) and eight short bolts (FF).
Before securing, please make sure the holes on the
metal bracket is completely lined up with the holes on
base.
Repeat for remaining foot (X).
Hardware Used
BB
FF
x 16
x 16
Washer
Short Bolt
Hardware Used
CC
x 4
Wooden Dowel
1
L
H
W
W
X
X
FF
BB
2
B
C
D
CC
3
2
1
1
AA
BB
CC
L
