Greentouch 1372KDI-36-268 Assembly / Care & Use Instructions Download Page 5

5

 

SAFETY INFORMATION (CONTINUED)

• 

To avoid electric shock, fire, or injury, review the 

assembly instruction to confirm that the appropriate 

critical components and accessories are being used 

with the furnishing. 

•  Death or serious injury may occur when children 

climb on audio and/or video equipment furniture. A 

remote control or toys placed on the furnishing may 

encourage a child to climb on the furnishing and as 

a result the furnishing may tip over on to the child.  

•  Relocating audio and/or video equipment to 

furniture not specifically designed to support audio 

and/or video equipment may result in death or 

serious injury due to the furnishing collapsing or 

overturning onto a child. 

CAUTION

•  DO NOT

 operate any heater with a damaged 

cord or plug or after the heater malfunctions. 

DO 

NOT

 operate any heater if it has been dropped 

or damaged in any manner. Disconnect power 

at service panel and have heater inspected by a 

reputable electrician before reusing. 

• 

Any repairs to this fireplace should be carried out by 

a qualified service person. 

• 

Under no circumstances should this fireplace be 

modified. Parts having to be removed for servicing 

must be replaced prior to operating this fireplace 

again. 

•  Household use only. 

•  DO NOT

 use outdoors. 

•  “

WARNING

 – Death or serious injury may occur 

when children climb on audio and/or video 

equipment furniture. A remote control or toys placed 

on the furnishing may encourage a child to climb on 

the furnishing and as a result the furnishing may tip 

over on to the child”. 

•  “

WARNING

 – Relocating audio and/or video 

equipment to furniture not specifically designed to 

support audio and/or video equipment may result 

in death or serious injury due to the furnishing 

collapsing or overturning onto a child”. 

•  This heater is not intended for use in bathrooms, 

laundry areas and similar indoor locations. 

NEVER

 

place heater where it may fall into a bathtub or other 

water container. 

•  To disconnect this appliance, turn controls to the 

OFF position, then remove plug from outlet. 

•  ONLY

 connect to properly grounded outlets. 

•  This appliance, when installed, must be electrically 

grounded in accordance with local codes, with the 

current CSA C22.1 Canadian Electrical Code or 

follow U.S.A. Installations, follow local codes and 

the National Electrical Code, ANSI/NFPA N0.70. 

• 

To prevent a possible fire, 

DO NOT

 block air intakes 

or exhaust in any manner. 

DO NOT

 use on soft 

surfaces, like a bed, where opening may become 

blocked. 

•  The heaters 

MUST NOT

 be located immediately 

below a socket-outlet. 

•  ALWAYS

 plug heaters directly into a wall outlet / 

receptacle. 

NEVER

 use with an extension cord or 

re-loadable power tap (outlet / power strip). 

•  DO NOT

 slide insert on top of wood to avoid 

scratching wood surface. 

•  DO NOT

 place any object on top of the insert or 

block the air intakes / vents as this can cause the 

unit to overheat and could cause a fire. 

Summary of Contents for 1372KDI-36-268




















Reviews: