INSTALLATION INSTRUCTION MANUAL
LED WALLPACKS LIGHT, 100-277VAC
Important: Read all instructions prior to installation
LED Wall Pack
Figure 3a:
Use hole marked
Figure 3b:
Use holes marked
“A” for J-Box mounting from
“B” for wall mounting from Fig.
Fig. 2. Attach using the correct
2. Attach using the correct
hardware
hardware. Use conduit for
transferring power
Figure 5:
Re-install two screws to
Figure 6:
Optional Glare Shield
close wall pack.
installation. Engage glare shield to
clips on the sides of the wall pack.
Secure with screws.
Figure 4:
Connect supply wires to
wall pack wires based on one of
the two diagrams below. Be sure
to connect both green/yellow wires
to the case position labled “GR”.
5845 Oakbrook Parkway, Suite A-B-C Norcross, GA 30093
P: 770-744-1300
