1
Intelligent Radar Level
Transmitter
Programming Menu
-
RD2690, RD6850 series
Greentech, Korea
www.greentechkor.com E-mail: [email protected]
Programming Menu
RD2690, RD6850 series
Brief Introduction :
Shown as the figure right, there are four buttons in the indication
face board, by pressing which, you can set and debug the
instrument. Menu languages are selectable. After setting or
calibration, LCD indicates measured values, which can be read
clearly through a glass window.
Following bellows are functions of the four buttons:
Button :
“ OK ”
Enter editing state
Confirm settings
Parameter modification saves
“
”
Selecting a setting item
Selecting digits of edited parameters
Indicating the content of the selected parameter
Note: hereinafter the button is called as
“KEY SELECTION” for easy-understanding.
“
+
”
Amending values of parameters
Selecting model of indication
“ Esc ”
Exit from editing state
Returning back to the previous menu
Shifting between measured values and chart of
echoes during operation
Interpretation of terms :
Programming interpretation: Using the four buttons at the indication board can perform
parameters setting, debugging and test, etc.
Structure of programming menu: For the structure of menu, please refer to the attached table one.
The movement of the horizontal arrows to right can be done by button
“OK”
.
The movement of the vertical arrow downwards can be performed by button
“SELECTION”
.
Button
“Esc”
for the movement to left for the horizontal arrow.
