THERMOSTAT OPERATING INSTRUCTIONS
1.
If you wish to change the thermostat, take the following steps.
2.
Hold the “S” set button until F1 shows on the screen.
3.
Release the “S” set button.
4.
Press the “S” set button and hold it. While holding it, use the
arrow keys to increase or decrease the temperature setting.
5.
Then release the “S” button and press the “P” power button.
6.
The recommended temperature setting is 77C. This is 170F.
As the fan pushes air through the heater, energy will be added
which we call heat. If you are using GreenTech Heat’s 4000
cfm fan, each minute 4,000 cubic feet of air will pass through
the heater and each time it passes through, the heater will add
heat/energy to the air until it reaches 170F/77C. Then the
heater will automatically shut off. It may take several hours to
reach the desired temperature, depending on the beginning
ambient temperature in the treatment area.
eMaster Pro
Temperature
Control
Indicator
Light
Heat Element
Plug Connectors
Power Switch
Start Switch
Heater shown on it’s side.
Air flow
