GreenTec LRS 1402, Quick Start Manual, Page: 3 / 12

2
|
GreenTec
|
Merkurvej 25
|
DK-6000 Kolding
|
Phone: +45 75 55 36 44
|
info@GreenTec.eu
|
GreenTec.eu
|
GreenTec Quadsaw: LRS series
Quick start guide
Original version
This quick start guide shows and describes how to assemble a GreenTec LRS Quadsaw on a
GreenTec HXF Multi Carrier . Mounting on other multi carriers often takes place in the same way -
always use an instruction book from the multi carrier used!
Remember that the quick start guide does not replace the instruction
manual for the attachment tool or the multi carrier!
(Always read the instruction manual carefully)
The following guide shows step-by-step instructions for installing an LRS-series quadsaw, with
accompanying pictures and explanations in the following sections:
Contents of this guide:
1. Unpacking of LRS Quadsaw: ................................................................................... 1
2. Mounting of LRS Quadsaw on the HXF Multi Carrier: ............................................ 2
3. Assembly of hydraulic hoses: .................................................................................. 3
4. Mounting of saw blades: ........................................................................................... 4
5. Installation and adjustment of branch guide and plastic rejector: ........................ 5
6. Careful testing: 15 min. test drive without sawing: ................................................ 6
7. Installation of safety protection: .............................................................................. 7
8. Concluding remarks: ................................................................................................ 7
Assembly of both the HXF Multi Carrier and the LRS Quadsaw must be carried out safely and
carefully:
Make sure that the tractor and front loader can carry the multi carrier and
the attachment tool in a safe and stable way, even if it is hanging out on
the side!
The multi carrier must only be assembled on a flat and firm surface, with
good space conditions, so that the tractor and attachment tool can
maneuver freely without the risk of getting caught!