6
|
GreenTec
|
Merkurvej 25
|
DK-6000 Kolding
|
Phone: +45 75 55 36 44
•
The collision safety device is located behind the swing-arm. (Marked above)
•
The impact cylinder is moved out and around, after which it is mounted on the arm with the
safety rivet which has just been dismantled.
•
The hole closest to the cylinder
MUST
be used for all saws and hedge cutters, as these tools
must point forward in the direction of travel.
o
Other holes are for dogwalk or better visibility from the driver's seat for attachment
tools other than saws and hedge trimmers.
o
The hydraulic cylinder for angle adjustment must be
FULLY pulled out, and then pushed FULLY in,
at least
twice
to ensure that all air is out of the cylinder and
hoses.
1 2 3
x2
For electro-hydraulic operation:
1.
Connect the power.
2.
Switch on operation.
o
The middle switch turns the
attachment tool on / off.
o
The switch is pulled outwards and
down for activation.
(Child Safety Device)
3.
Activate hydraulic cylinder.