HXF 2800 / 2802 AHS
25
Pins and Bushes
All main pivot points are furnished with replaceable bushes. If there are any signs of wear, these
must be replaced. All bushes are available from Greentec’s Parts Department.
Storage
Remember regular maintenance will greatly increase the life of the machine
Before storing away, thoroughly wash the machine removing all traces of grass and dirt. Great care
must be taken when washing with high-pressure hoses, do not hold the water jet close to the
paintwork. Use steam cleaners with caution; be sure to remove all detergents to avoid any
discolouring or damage to paint. Grease all grease points until fresh grease shows. It is important
where possible to store under cover to protect against rain and sunlight. Always ensure a firm level
surface. Control levers must be wrapped in plastic sheeting and taped over to keep dry Smear
greaser on all areas vulnerable to corrosion, in particular the chrome on the ramrods.
Before you attempt to do any repairs, service, maintenance or adjustment on your machine, ensure
the engine has stopped and the key removed. P.T.O. is disengaged, handbrake secure, and the
head is firmly on the ground.
Remember regular maintenance will greatly
increase the life of the machine
Warning
Do not use grease containing Molybdenum
disulphide on nylon bushes and wear pads
Summary of Contents for HXF 2800
Page 1: ......
Page 20: ...HXF 2800 2802 AHS 20 Diagrams Splitter Valve...