GreenTec
Rotary Crusher GT 135 + 155
14
Setting up and adjusting
Height
Cutting height adjustment is achieved by your operating system, when you work with the
machine.
Machine Protection
A flotation system can be used in the connection
between the GT 135-155 and the armsystem, also a
skid is mounted on each side of the head
Important
If the machine has been laid up for any length of time, there is a risk of risk of moving parts is
stuck. They must be lubricated and loosened before using the machine.
Start the motor up at idle speed and allow it to "warm" up. If imbalance is observed, stop the
machine immediately. Check that there are no tangled cords, plastic, grass or other debris
around the rotor shaft or tools..
If in any doubt, consult your local GreenTec dealer or GreenTec Service Department for further
advice
