H4905A Hydraulic Sign Post Puller
Greenlee Tools, Inc.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
5
IMPORTANT SAFETY INFORMATION
Hydraulic oil can cause skin irritation.
• Handle the tool and hoses with care to prevent skin
contact with hydraulic oil.
• In case of accidental skin contact with hydraulic oil,
wash the affected area immediately to remove the
oil.
Failure to observe these precautions may result in
injury.
• Inspect the hydraulic hoses and couplers every
operating day. Repair or replace if leakage, crack-
ing, wear, or damage is evident. Damaged hoses
or couplers may fail, resulting in injury or property
damage.
• Use this tool for manufacturer’s intended purpose
only. Use other than that which is described in this
manual may result in injury or property damage.
• Make sure all bystanders are clear of the work
area when handling, starting, and operating the
tool. Nearby personnel may be injured by flying or
falling debris or by flying parts in the event of a tool
malfunction.
Emergency stop procedure/power supply failure:
1. Release the control lever.
2. Shut off the hydraulic power source.
Procedure for connecting or disconnecting hydraulic
hoses, fittings, or components:
1. Move the flow lever on the hydraulic power
source to the OFF position.
2. Stop the hydraulic power source.
3. Follow the sequence under “Hose Connections”
in the Instruction Manual to prevent pressure
buildup. In case some pressure has built up,
loosen hoses, fittings, or components slowly.
Note: Keep all decals clean and legible, and replace
when necessary.
