LS100L Battery-powered Punch Driver
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
9
Setup and Operation
(cont’d)
Note: Refer to “Capacity and Draw Stud Selection Guide”
on page 12 for capacity, draw stud, and hardware.
MILD STEEL
Punching Mild Steel
• 1/2" Conduit Size
(dia. 0.885" / 22.5 mm)
Punching Mild Steel
• 3-1/2" to 6" Conduit Size
(dia. 4.011" to 6.375" /
102.7 mm to 161.9 mm)
Punching Mild Steel
• 3/4" to 3" Conduit Size
(dia. 1.115" to 3.539" /
28.3 mm to 89.9 mm)
2113B
Draw Stud
7/8" (22.2 mm)
Pilot Hole
Material
Being Punched
Die
Punch
1924AA Spacer
(3/4"–1-1/4" only)
2113B
Draw Stud
ø 1-3/8" (34.6 mm)
Pilot Hole
Material
Being Punched
Die
Punch
1557AA
Sleeve
Punch
Material
Being Punched
20963
Draw Stud
Die
1/2" (12.7 mm)
Pilot Hole
1924AA
Spacer
