background image

Battery-powered Pistol Grip Cable Cutters

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

6

All Models

Cutting Tool

Hydraulic Oil ......................... 52057878 biodegradable 

hydraulic fluid

Recommended Operating  

Temperature Range ................................ 5 °F to 122 °F

 

(–15 °C to 50 °C)

Battery Charger ............... Read the instructions supplied  

with the battery charger

ESG45L

Cutting Tool

Length ................................................15.75" (400 mm)
Width ...................................................2.87" (72.9 mm)
Height ..............................................12.75" (323.8 mm)
Weight .................................................. 12.6 lb (5.7 kg)

Cutting Capacities

Maximum Cable Cutting Diameter 

(copper and aluminum) ..........................1.75" (45 mm)
ACSR ................................. Falcon 54/19 (1590 kcmil)
Guy Strand ........................................5/8" (16 mm) dia.
EHS Guy Strand ................................1/2" (13 mm) dia.
Ground Rod ......................................5/8" (16 mm) dia.
Rebar (Schedule 60) ..........................1/2" (13 mm) dia.
Wire Rope .........................................5/8" (16 mm) dia.

ESG50L

Cutting Tool

Length ...............................................16.0" (406.4 mm)
Width ...................................................2.87" (72.9 mm)
Height ................................................14.5" (368.3 mm)
Weight .................................................. 10.4 lb (4.7 kg)

Cutting Capacity

Maximum Cable Cutting Diameter 

(copper and aluminum) ...............................2" (50 mm)

ESG55L

Cutting Tool

Length ................................................18.12" (461 mm)
Width ......................................................3.12" (80 mm)
Height .................................................13.25" (337 mm)
Weight ..................................................... 17.5 lb (8 kg)

Cutting Capacities

Maximum Cable Cutting Diameter 

(copper and aluminum) ..........................2.12" (55 mm)
ACSR ................................... Joree 76/19 (2515 kcmil)
Guy Strand ........................................5/8" (16 mm) dia.
EHS Guy Strand ..............................9/16" (14 mm) dia.
3/4" Ground Rod ...............................3/4" (19 mm) dia.
Rebar (Schedule 60) ..........................5/8" (16 mm) dia.
Soft Steel Bolts .................................3/4" (19 mm) dia.

Specifications

ESC85L

Cutting Tool

Length .............................................19.25" (488.9 mm)
Width ...................................................2.87" (72.9 mm)
Height .................................................14.25" (362 mm)
Weight .................................................. 13.8 lb (6.3 kg)

Cutting Capacities

Maximum Cable Cutting Diameter  

(copper and aluminum) ............................3.3" (85 mm)

ESC105L

Cutting Tool

Length ...............................................24.0" (609.6 mm)
Width ...................................................2.87" (72.9 mm)
Height ...................................................14.8" (376 mm)
Weight .................................................. 19.4 lb (8.8 kg)

Cutting Capacities

Maximum Cable Cutting Diameter  

(copper, aluminum, lead armored,  

and soft steel armored cable) ..............4.13" (105 mm)

ESG105LU

Cutting Tool

Length ...............................................24.0" (609.6 mm)
Width ...................................................2.87" (72.9 mm)
Height ...................................................14.8" (376 mm)
Weight ................................................ 23.1 lb (10.5 kg)

Cutting Capacities

Maximum Cable Cutting Diameter  

(copper, aluminum, lead armored,  

and soft steel armored cable) ..............4.13" (105 mm)

All Models

52047087

120 VAC corded adapter

52047088

230 VAC corded adapter

52049189

18 V, 3 Ah lithium-ion battery

52049201

120 VAC, 18 V charger

52049202

230 VAC, 18 V charger

52049204

12 VDC, 18 V charger

52054992

Li (18 V) to NiCd, NiMH (12 V)  

charger adapter

50122746

Carrying strap

Summary of Contents for GATOR ESC105L













Reviews: