2
Hydraulic Power Pump
Additional or replacement manuals may be obtained
from your Greenlee distributor. When tool is received,
complete the following record:
SERIAL NUMBER: ____________________________
DATE OF PURCHASE: ________________________
WHERE PURCHASED: ________________________
Always mention the tool’s serial number when ordering
or writing about parts.
For convenience in ordering, parts are listed by part
number, description and quantity. If in doubt as to part
needed, send a full description, sketch, or the part itself
with the order. Prior arrangements must be made before
returning a tool for warranty service.
To insure correct and prompt shipment of parts, always
provide the following information when ordering:
1. Quantity of each part wanted
2. Part number of item
3. Description of part
4. Serial Number of tool
5. Preferred method of shipment: by mail, UPS,
or air freight
IMPORTANT SAFETY INFORMATION
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message after
the signal word provides information for preventing or
avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in severe
injury or death.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
SAFETY
ALERT
SYMBOL
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning will
result in severe injury or death.
Bee Line Company
6231 State Street
P.O. Box 709
Bettendorf, Iowa 52722-0709
319/332-4066
Do not connect the pump to any system or system
component other than those supplied by Greenlee.
Other manufacturers’ components may not with-
stand the maximum pressure and may fail. Nearby
personnel can be injured by flying components and
hydraulic oil.
Failure to observe this warning will result in severe
injury or death.
Do not alter the internal high-pressure relief valve
setting. Altering this setting will change the maxi-
mum pressure the pump can develop, which can
cause a component failure. Nearby personnel can
be injured by flying components and hydraulic oil.
Failure to observe this warning will result in severe
injury or death.
