Greenlee 920XC-13A, Instruction Manual

Page: 63 / 128

63
920XC-13A • 920XC-15A • 920XC-20C Instruction Manual
Appendix A.
Quick Reference Guide and Menu Shortcuts
Before connecting fiber, note whether
the connector on your 920XC is APC
or UPC, and make sure the connector
on your jumper is the same type.
Permanent damage to the 920XC will
result if they are mismatched.
Clean the fiber connector and
bulkhead on the 920XC.
Connect fiber. Note that different
types of connectors have unique
mating requirements.
1-00-642-2155 or 1-760-59-900
www.greenlee.com
Press to turn on the 920XC.
Use.to.highlight. .in.the.menu.bar.and.press.
Enter
..
Select range (usually auto), wavelength, and measure
mode (usually averaging). Refer to the Instruction
Manual.for.additional.parameters.
Acquire and View Trace
Press once to acquire a trace.
+
Hold.the. Shift .key.and.press. Enter .to.step.forward.
through the events list.
+
Hold.the. Shift .key.and.press. .to.step.backward.
through the events list.
Beginning of fiber
Reflection event
Attenuation event
End of fiber
Press to step through the information windows:
• Events list.
•. Marker.A/B.information.
•. Fiber.information.
•. Measurement.trace.parameters.
•. Analysis.trace.parameters
A/B Cursor Control
Use.to.highlight. A/B .in.the.menu.bar..Press. Enter .to.
switch.between.A.and.B.cursor.
Use to move selected cursor left or right.
Expand and Contract Trace around Highlighted Cursor
+
Hold.the.
Shift
.key.and.press. p .to.expand..
the trace vertically.
+
Hold.the.
Shift
.key.and.press. q .to.contract..
the trace vertically.
+
Hold.the.
Shift
.key.and.press. t .to.expand..
the.trace.horizontally.
+
Hold.the.
Shift
.key.and.press. u .to.contract..
the.trace.horizontally.