750 Cable Cutter
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
KEEP THIS MANUAL
IMPORTANT SAFETY
INFORMATION
SAFETY
ALERT
SYMBOL
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
Loctite is a registered trademark of Loctite Corporation.
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ......................................2-3
Setup .............................................................................. 4
Operation ........................................................................ 4
Converting a 746 Hydraulic Ram
to a 750 Cable Cutter ..................................................... 4
Maintenance ................................................................... 5
Illustrations ..................................................................6-7
Parts List ........................................................................ 8
Description
The 750 Cable Cutter is a hydraulic cable cutter with
hardened and precision-ground jaws designed to cut
large cable.
The capacity of this tool is 1000 MCM standard copper
or aluminum power cable and 1000 MCM underground
million jacketed cable (260 mil/2.25 dia.)
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This instruction manual is intended to familiarize
personnel with the safe operation and maintenance
procedures for 750 Cable Cutter.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.