E27 cap adapter with remote control
Technical data
Range of 100 meters (without barriers)
Frequency: 433,92Hz
It can be managed with 4 differents remote controls
Input: 220-240V/50Hz
The remote control, or switch must be purchased separately as
accesory.
Instalation
The adapter has to be away from the radio signal generator
devices (WiFi, ADSL, phone, microwaves, etc). Avoid metallic
barriers.
Unplug the power supply.
Unscrew the bulb.
Screw in the adapter.
Screw in the bulb.
Plug in the power supply.
Push the adapter button to turn the bulb on, then push it again
to turn it off.
Remote control coding
Push for 3 seconds the coding button, then push the start button
of the remote control in the zone you want the bulb works.
The adapter can be managed with 4 differents remote controls
To delete the adapter configuration, push the coding button for
10 seconds, then the light will flash 6 times to indicate the
configuration is deleted successfully.
Coding button
Start/on
Off
