PLACAS DOWNLIGHT LED ULTRAFINAS
LED Streetlight
8
1.- Verify the absence of voltage and make sure that the luminaire is grounded. It is
essential to check the anchors and supports of the entire mechanism.
2.- Cancel or remove all auxiliary equipment from the luminaire. Ballasts and starters
must be completely bypassed before connecting the new LED bulb.
3.- Check that the existing cables and strips are in perfect condition. If not, replace
them before proceeding with the installation.
4.- Check the correct fixing of the E27 or E40 lamp holder to the luminaire.
5.- Take the 230VAC power cables directly to the E27 or E40 lamp holder. Screw the
bulb into the socket and power the fixture.
2.
LAMP INSTALLATION:
When installing led streetlights we can find different types of anchoring. We
can differentiate between:
• Cylindrical anchor.
• Rectangular anchor.
• Anchorage by plate.
CYLINDRICAL ANCHOR
It is the most typical anchor in this type of product. The streetlight comes prepared
with a cylindrical coupling and we only have to look at the inside diameter of it to
know which pole it can be attached to.
For its installation we must follow these indications:
