07
GREENIS
POWER BLENDER
GREENIS
POWER BLENDER 08
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
On/Off “ ”
Tap “On/Off” button to start working after selecting pre-programmed cycle, and tap it
to stop during work.
There are 10 speed variables displayed on the panel. When the blender is working at a
specific speed, the light for that speed and for those below will be on, e.g. when the
blender is working at speed 2, light for speed 1 and speed 2 will be on.
Time progress will be displayed in percentage of the total work time that it will take for
a cycle. The minimum display unit is 10%.
When the blender has progressed the 11% - 19% (e.g. 15%) of the cycle, the light for 10%
will be on, and light for 20% will be flickering, and so on.
Continuous work time is no more than 10 minutes.
Rotating the Speed Dial, the blender will start working at selected speed. The longest
continuous working time is 10 minutes.
Rotate the Speed Dial clockwise to increase speed (maximum speed 10) and rotate
anti-clockwise to decrease speed. The blender will stop working when speed is
decreased to 0.
Hold “Pulse/Clean” button to keep working at the highest speed 10. Release the button
to stop.
The blender has Bluetooth function. Check the connection status in the GREENIS APP.
Search “GREENIS” in Apple Store or Google Play. Download and install GREENIS app to
your mobile phone.
Open the app, select “Recipes” at the bottom of the home page. Select the desired
recipe.
Prepare food ingredients as instructed, put ingredients into the blend jar, close jar lid
properly and put the jar on motor base.
Turn on Bluetooth on your phone (go to next step if it’s already on).
Get back to home page of the app. Select “Kitchen” at the bottom of the page.
Click searching button to search blenders available and click “Connect” to connect the
blender to your phone.
Get back to the “Recipes” section, search and go to the recipe that you selected before.
Click download button at the upper right corner of the recipe page to download the
program to your blender.
Tap “On/Off” button at the blender to start processing as selected recipe program.
You can see the progress in the app and the blender will stop automatically when the
program is completed.
Time Display
Speed Dial Mode
Pulse/Clean
Bluetooth
GREENIS app Instruction
Speed Display
