11
GREENIS
POWER BLENDER
GREENIS
POWER BLENDER 12
WEEE
Correct Disposal of this product
This marking indicates that this product should not be disposed with other house-
hold wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
TROUBLESHOOTING
Fault
Possible cause
Possible solution
The unit does not work
after being connected
to power (no display on
the control panel).
The jar is not securely placed
on the motor base or the lid is
not in place.
Remove the jar or lid and place
them properly.
The LCD display
indicates E2 or E3.
E2 means motor overheating
protection is activated.
E3 means motor overloading
protection is activated.
When the LCD display indicates E2,
cool off the machine for 45 minutes
and reduce ingredients.
When the LCD display indicates E3,
remove big chunks of ingredients
that clog the blades.
Bluetooth cannot be
connected.
1. Switch off the machine and remove the
jar. Check if there are any foreign objects
on the mat. Place the jar back in position
again.
2. Remove the measuring cup from the lid
and a 6-cm-wide opening is revealed. Use
the tamper to stir through the opening.
The machine suddenly
stops during the
operation.
The lid is blown out by
the food.
Place the lid back in position and
restart the machine.
Abnormal noise
during the operation.
1. Either the jar or mat is not
correctly assembled.
2. Foreign objects are stuck
on the drive socket.
The cell phone’s Bluetooth is
not activated or it is out of
effective distance.
1. Try to open cell phone’s Bluetooth
again.
2. Place the cell phone as near as
within 3 meters from the machine.
All lights are on while
touch buttons do not
work.
1. Caused by capacitance
interference of touch panel.
2. Tap any two of buttons
simultaneously.
1.Unplug the machine. Plug again
and tap "On/Off" button to restart.
2.Release one button (only
touching one button at a time).
Attention:
Above are general problems users may encounter and possible solutions they can
adopt. For other problems with the machine, please contact local after-sales for
repair purpose. Do not open the machine and repair by yourself.
PRODUCT SPECIFICATIONS
Model
FGR-8800
Voltage/Frequency
See rating label on base of product
Rated power
1000W
Dimensions
21(L)*22.5(W)*50(H) cm
WHAT’S IN THE BOX
Motor base
Jar
Lid
Measuring cup
Tamper
Spatula
Cleaning brush
Drive socket (spare)
Seal ring for lid (spare)
User manual
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
