APLIQUES Y PLAFONES DE EXTERIOR
Outdoor ceiling plates
6
Likewise, we must have the ability to carry the electrical current to the
desired point, in order to power the wall light correctly.
As for the necessary materials, we will need a drill to make the fixing holes
and a Phillips (star) screwdriver to fix the screws.
To make the connections, we will need a flat screwdriver if we use a classic
connection terminal, or pliers and insulating tape if we make the
connection with other types of existing terminals.
ATTENTION:
The outdoor ceiling lights and fixtures come prepared with an
IP protection of different characteristics that makes them withstand
greater or lesser exposure to the elements, but you must ensure by your
own means that the electrical connection point is equally resistant.
INSTALLATION
1.
First of all, we will cut the current in the installation area. Likewise, we will
carry out the appropriate checks to confirm that the wall light can be
installed in the desired area (adequate electrical connection, sufficient
space...)
2.
To continue, we will detach the fixing plate from the wall light and use it to
mark the holes and the place of fixing.
3.
