
Are my plants ready to transplant?
Always remove the plant pot or the rockwool’s plastic cover prior to planting in your Hydrogrow NFT.
We do not recommend starting your plants in a pot or rockwool cube larger than 7 or 8cm/3inches.
Always remove the pot or rockwool cover prior to planting in your Hydrogrow NFT.
Planting out
Remember you should have abundant white roots on the outside of your soil or rockwool cube before
transplanting.
Place the young plant through the pre-cut holes to rest on the tray.
The fi rst few days
Signs of root growth into the tray should be seen within 48 hours. At this stage add greenhouse
sensation
™ nutrients at the start-up dose rate (see page 7). In the right conditions root growth is
amazingly rapid. The picture opposite shows the roots of a tomato plant after just three weeks in a
Hydrogrow NFT.
Making up your nutrient
Your two nutrient bottles contain nutrient powders which need to be mixed with water.
Add 2.5L of warm water to each bottle. Shake the bottles thoroughly to ensure the
powder dissolves fully.
A & B nutrients should always be used in equal measures and should be added to the
water seperately, add the required dose of A to your watering can or jug of water
followed by the required dose of B nutrient.
Our gardening experts are available to help with any questions you may have.
Call: 0845 602 3774
Email: [email protected]
Facebook: greenhouse sensation