AMS
AMD-42
AM
Airflow
Receiving and Handling
Upon receiving dampers, check for both obvious
and hidden damage. If damage is found, record all
necessary information on the bill of lading and file
a claim with the final carrier. Check to be sure that
all parts of the shipment, including accessories, are
accounted for.
Dampers must be kept dry and clean. Indoor storage
and protection from dirt, dust and the weather is
highly recommended. Do not store at temperatures in
excess of 100°F (38°C).
This manual is the property of the owner and is required for future maintenance. Please leave it with the owner when
the job is complete.
Safety Warning
Improper installation, adjustment, alteration, service
or maintenance can cause property damage, injury
or death. Read the installation, operating, and
maintenance instructions thoroughly before installing
or servicing this equipment.
Note: A minimum velocity of 300 fpm (1.5 m/s) is required.
Table of Contents
Pre-Installation Guidelines . . . . . . . . . . . . . . . . . . . 2
Electrical Guidelines . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Setup and Operation for AMS and AMD Series
Without Factory Supplied Controller . . . . . . . . . 3
Clearances Required Between Damper
Sleeves and Wall/Floor Openings . . . . . . . . . . . 4
Installing Multiple Damper Section
Assemblies
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Multiple Section Damper Wiring . . . . . . . . . . . . 5
Maximum Assembly Tables . . . . . . . . . . . . . . . . 5
Inserting Damper into Wall/Floor Openings . . . . 6
Securing the Damper/Sleeve Assembly to
Wall/Floor
Openings
. . . . . . . . . . . . . . . . . . . . . 7-8
Duct to Sleeve Conneciton . . . . . . . . . . . . . . 9-10
Actuator and Temperature Response
Device
Connections
. . . . . . . . . . . . . . . . . . . . . 11
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 12
®
AMD & AMS Series
1
®
Document 474014
AMD & AMS Series
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with these instructions will result in voiding of the product warranty and may result in personal injury
and/or property damage.
