Questions
?
Email [email protected] or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL PINE RAISED GARDEN BED | ASSEMBLY INSTRUCTIONS
MODEL #
RCP24967
DIMENSIONS
2ft. wide x 8ft. long
x 7in. high
PACKAGE CO
(6) Screws
x6
x6
8in. x 2.5in. x 2.5in.
Short Posts
4ft. x 3.5in.
Boards
3.5in. x 3.5in.
Decorative Caps
x8
1.
CONNECT THREE SHORT POSTS TOGETHER WITH TWO 4FT. BOARDS
Holding a Board in one hand with the notched ends facing up, line
up the groove on a Short Post and slide it down over one end of the
Board. Slide another Short Post down over the other end. With the
same Short Post, slide the second Board through the groove finishing
with another Short Post at the end to complete one 8ft. wall.
Repeat step one to complete a second wall.
2.
CONNECT THE TWO WALLS TOGETHER WITH THREE 2FT. BOARDS
Take a 2ft. Board and slide it down over the top of a
Short
Post. Connect
the same Board to an adjacent
Short
Post on the second wall. Do the
same with two more 2ft. Boards completing a 2ft. x 8ft. rectangle.
3.
ADD A SECOND BOARD TO ALL WALLS & ATTACH
DECORATIVE CAPS
Add Boards, one at a time, directly on top of each existing Board in
the Frame. Push the Boards down evenly between the tops of the
Short
Posts. If needed, tap snugly into place with a rubber mallet.
Attach each Decorative Cap to a
Short
Post with a screwdriver and
one Screw. We recommend drilling a pilot hole first for each Screw.
x6
2ft. x 3.5in.
Boards
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M–F 8–5
INSTALLATION SUPPORT
youtube.com/greenesfence
TO STACK GARDEN BEDS FOR MORE HEIGHT:
• Assemble the first Garden Bed without Decorative Caps, or remove Caps
from a completed Bed.
• The Corner Posts are designed to be taller than the Boards, so Beds can
be stacked securely.
• Slide a Board from the second Garden Bed into tops of the Corner Posts from
the first Bed, to extend one wall upwards.
• Slide Corner Posts from the second Bed down on both ends of the Board to lock in place.
• Continue assembling the second Bed, sliding Boards and Posts into place on top
of the first to complete another rectangle.
• Attach Decorative Caps to the tops of each Corner Post.
