background image

                                                            GreenDS

 Auto Fault Computer Diagnostic Equipment

 

21 

6.

 

Warrant Clause 

Dear GreenDS users, welcome to choose GDS+ 3 products. In order to better use of the product, we recommend 

that  you  should  take  care  of  your  product  well,  and  operate  in  accordance  with  user  manual's  instructions 

whenever  you  use  it.  If  your  use  meets  this  requirement,  your  product  will  be  able  to  provide  you  longer-term 

services. 

1

    In line with the following terms and conditions. And under the premise that you have bought our products 

and  registered  in  the  website  of  Shenzhen  GreenDS  Technology  Co.,  Ltd.  (hereinafter  referred  to  as  "GreenDS 

Technology"),  GreenDS  technology  will  provide  free  product  warranty  services  by  our  distributor,  if  there  are 

defects in materials or workmanship of hardware. 

2

  Confirm that you have carefully read the product warrant clause, otherwise as GreenDS Technology registered 

your  mailed  warranty  card  stub  ,  you  will  be  considered  as  agreeing  to  and  accepting  the  terms  of  this  warrant 

clause. 

3

  Your product must be purchased from product dealer that authorized by  GreenDS Technology. To purchase 

products through the illegal channels, buyers have to bear the cost of product maintenance services and so on and 

can’t get the warranty by GreenDS Technology. 

4

  The following items of products: Items that are easy to wear and tear such as product instructions, inner and 

outer  package  box,  attached  power  supply,  promotional  giveaways,  SD  card,  card  reader,  touch  pen,  printing 

supplies etc. are not under warranty range 

5

Products from the date of purchase (subject to valid purchase proof and effective warranty card of the product), 

if the products suffer performance failure caused by non-human factors, you can choose our maintenance services 

or replace the product with the same model within a month. You can enjoy one year warranty service for main unit, 

excluding human damage and incorrect operation.   

6

You will not be able to enjoy free warranty service if the products are in any of the following case,:   

1) Failure, defect or flaw that do not belong to the quality of GreenDS Technology products: including your use of 

the product not according to the product instruction, improper operation of the product, crash, fall, disassembly by 

yourself, connection of improper accessories, damage owing to crash because of improper transport or storage of 

the product, the erosion and corrosion, etc. that caused by infiltration of liquid or food. 

        2)  The  natural  wear  and  tear  of  product:  including  but  not  limited  to  cover,  keypad,  LCD  touch  screens, 

accessories etc. 

        3)  Product  main  unit  serial  number  and  warranty  card  product  serial  number  do  not  match,  and  product 

quality inspection tag or bar code is removed, altered or damaged. 

4) Maintenance and modification without the approval of GreenDS Technology or GreenDS distributor 

7

The  product  quality  problem  or  failure  occurring  within  the  warranty  period,  you  can  take  the  following 

measures: 

        1) You can inspect product by yourself based on products help information. If there are no hardware quality 

problems, try to upgrade the product program. 

Summary of Contents for GDS+ 3

























Reviews: