![background image](http://html1.mh-extra.com/html/greencut/jet220c-4/jet220c-4_instruction-manual_2261543044.webp)
44
TROUBLESHOOTING
The table includes some of the most common problems, their causes and remedies
NOTE:
In the event of not being able to resolve the problem, get in touch with an Authorised
Service Centre.
TRANSPORTATION AND STORAGE
•
Remove the plug from the power socket and disconnect the machine from the water before transporting or
storing the pressure washer.
•
Use the wheels to transport the machine. Hold the appliance by the handle and pull it.
•
Clean the detergent tank before storing the machine.
•
Always store the product in a clean, safe, dry place with temperatures between 0º and 45ºC.
•
The equipment is not weatherproof and should not be stored in direct sunlight, at high temperatures or in damp
places.
•
The machine when not in use should be stored clean, on a flat surface.
•
Store the machine out of the reach of children.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Machine does
not start
No power supply
Contact after-sales service.
Faulty power supply.
Pump locking ring too tight.
Not enough
water comes
out, working
pressure is
uneven
Filter is blocked.
Clean the filter.
Inlet connection is not good, air in the inlet
pipe.
Check the connection, tighten the gasket.
Check if the hose is clogged or if there is not
enough inlet water.
Valve is blocked.
Clean the valve and reinstall it.
Outlet nozzle is not smooth.
Contact after-sales service.
Water leakage
in the pump
3 drops of water every minute is permissible,
but if more water leaks out, the seal may be
worn.
Contact after-sales service.
Engine stops
suddenly
Pressure control worked.
Check if the outlet nozzle is blocked. Clean
the nozzle.
Thermal protection may have switched off the
motor to prevent overheating.
Turn off the cleaner, leave the machine for a
few minutes to cool down.
Summary of Contents for JET220C-4
Page 2: ......
Page 58: ......
Page 59: ......
Page 60: ...www greencut tools com Manual revisado en junio de 2021...