![background image](http://html1.mh-extra.com/html/greencut/glm200l/glm200l_instruction-manual_2261492055.webp)
55
EN
TROUBLESHOOTING
The table includes some of the most common problems, their causes and remedies.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The mower does
not start.
The battery is not charged.
The switch is defective.
Grass is stuck between the cover and the blade.
The battery is not fully inserted into the mower.
The battery may require service or replacement.
Charge the battery.
Replace the switch
Remove the battery, check if there are any jams
under the cover.
Check the connection between the battery and
the mower. Make sure that the battery fits in
place.
Replace the battery.
The mower cuts
the grass unevenly.
The grass is rough or uneven.
The cutting height is not set correctly.
Check the cutting area.
Move the handles to a higher setting
The mower
does not mulch
properly.
Wet grass clippings are stuck to the underside
of the cover.
The blade is damaged.
Wait until the grass is dry before mowing.
Sharpen the blade or replace it.
The mower is
hard to push.
The grass is too tall, or the cutting height is too
low.
The back of the grass collection basket is
dragging on thick grass.
Raise the cutting height.
Empty the grass clippings from the grass
collection basket.
The mower is
excessively noisy
and vibrates.
The motor shaft is bent.
The blade is unbalanced.
The screws/parts are loose.
Stop the engine and inspect for damage.
Repair before restarting.
Tighten the screws.
NOTE:
If you are unable to resolve the problem, please contact the Official Technical Service.