39
EN
MAINTENANCE
Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION:
Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.
•
Spare parts must be purchased from the Official Technical Service.
•
Keep the machine clean, especially the engine ventilation windows.
•
Clean the housing of your machine with a cloth moistened in water.
•
Never use gasoline, solvents, detergents, water or any other liquid to clean the machine.
•
Periodically check that the charger and the battery are intact.
•
Like all rechargeable batteries, after use time, it will be necessary to replace it.
•
Keep the charger clean, especially the battery connections. Dirt can cause electric shock and / or fire.
NOTE:
To guarantee the safety and reliability of the machine, repairs, maintenance and adjustments
must be made by the Official Technical Service and always using original spare parts.
TROUBLESHOOTING
The table includes some common problems, their causes and solutions.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Unit does
not run
• Battery not making contact.
• Battery not installed properly.
• Battery not charged.
• Check battery is fully inserted.
• Check that battery is securely connected to the blower.
• Check battery charging requirements.
Battery will
not charge
• Battery not inserted into charger
• Charger not plugged in.
• Surrounding air temperature too
hot or too cold.
• Insert battery into charger until LED appears.
• Plug charger into a working outlet.
• Check current at receptacle by plugging in a lamp or other
appliance.
• Check to see if receptacle is connected to a light switch which
turns power off when you turn out the lights.
• Move charger and tool to a surrounding air temperature of
above 50ºF (10ºC) or below 100ºF (+37.8ºC)
Low
blowing
power
• Battery not charged.
• Charge the battery.
NOTE:
If you are unable to resolve the problem, please contact the Official Technical Service.
