Installation Guide
RootRain Civic & Urban
Important - Please read these instructions fully before starting assembly
2
For further help telephone our technical helpline on 01424 433233
Installation Detail
Planting
Plant tree as normal, backfilling to approximately 300mm below final ground level. Remember
to allow for mulch.
Laying the pipe
Lay pipe in loop around the root ball system trimming pipe length to ensure snug fit in the tree
pit. Pipe should be laid in a loop as near to horizontal as practical in site conditions. Both ends
of the pipe should then be connected into the plastic tee junction. Ensure that pipes are pushed
in at least 50mm.
The inlet should be not more than 50mm above finished surface levels.
Backfilling
When the RootRain Urban is assembled, backfill layers firming gently over the pipe. Grid top
should protrude slightly to prevent ingress of mulch or earth.
RRCIVICINA
RRPCIVICTOPA
RRCIVICREDA
RRCIVICTEEA
RRCIVICCAPA
RRURBINA
RRURNTOPA
RRURBEDA
RRURBTEEA
Civic Complete INLET (Grid Cap, Reducer, downpipe and Tee) Section
Civic Top ( Grid Cap) Section
Civic REDUCER Section
Civic TEE Section
Civic Black Coated Aluminium Cap on Chain
Urban complete INLET (Grid Cap, Reducer downpipe and Tee) Section
Urban TOP (Grid Cap) Section
Urban REDUCER Section
Urban TEE Section
Individual Components
