1. Before using, make sure the unit is charged. To charge, first plug
the adapter into the unit*, then into the wall. When charging, a red
light will appear in front of the power switch. This red light will
disappear will the unit is fully charged. Please be reminded, that the
adapter is at the bottom of the handle on the left side of the unit.
How to use
On
Switch
Off
A
Trigger
B
Nozzle
C
LED
D
4. When it starts misting, you’ll notice the blue light on the nozzle
and the bright white LED below the nozzle is enough to help you
see the dark spaces/surfaces when spraying.
3. Pull the trigger and spray on your desired surface.
Please wait for the unit to stop misting before placing on surfaces
such as a table. Please be reminded that the unit will continue to mist
for 5-10 seconds before it fully stops misting.
2. Use the switch at the top to turn the unit on. Slide switch
forward to turn on the unit and slide switch backwards to turn off
the unit.
* The adapter port is located on the left side of the diffuser at the
bottom of the handle when looking from the handle to the front of the unit.
A
A
A
A
Adapter Port
E
E
B
C
C
D
