LiAir
X3
User Guide • GreenValley International Inc.
Page 45
7.
System Transportation and
Maintenance
7.1
Operation Notice
To ensure the reliable use of the system and the safety of the operation personnel, please
observe the following notices during installation, use and maintenance.
1.
Pay attention to the protection of the scanning lens to prevent scratches.
2.
Handle with care during installation to prevent the system from falling or being
impacted.
3.
Before scanning, please make sure the scanning lens is clean and dust-free.
4.
Avoid sudden changes in temperature to prevent damage to the system.
5.
During the operation, it is forbidden to directly contact the laser scanning lens with any
part of the body.
6.
If the system needs to be transported, it must be stored within appropriate packages.
7.
The operating temperature of the system is -20℃~50℃. In case of rain, snow, fog, sand
and other bad weather, the operation should be stopped. It can prevent equipment
damage and on the other hand, it can ensure the measurement accuracy. In case of
sudden bad weather during work, please move the device to a safe place in time.
8.
Please pinch both ends of the connector when pulling out the OSDK communication
cable, and prohibit violent insertion and removal.
9.
Non-professionals, without permission, please do not try to disassemble the
equipment, do not repair it without permission, so as to avoid accidents or aggravate
the damage of the equipment. If the equipment is modified or disassembled not
authorized by GreenValley International Inc., the warranty will be void.
