SKYCHARGE Mobile
–
TECHNICAL DOCUMENTATION
Page 4
2
CONNECTION
TO
THE
GRID
The SKYCHARGE Mobile is equipped with a 10m supply cable. The connection to the grid is done through a 32 A, 5
poles, 400 V, 6h CEE plug.
Connect the station to the grid with the following protections:
Model
22 kW
Input voltage
400 V
AC
Input current
32 A
rms
Circuit breaker at panel (1)
C40
Residual Current Mandatory Device
Doepke RCCB DFS 4 040-4/0.03-A EV R
Or
Eaton 167897 FRCDM-40/4/03-G/B
(1)
The Installer must define the types of Circuit breaker.
The circuit breakers at panel of 40 A overvalued in order to ensure the functioning of the charging station
with a temperature increase.
Please be sure to install a mandatory RCD device after the C40 breaker.
Green Motion strongly recommends using a
Doepke RCCB DFS 4 040-4/0.03-A EV R
as an RCD device or
Eaton
167897 FRCDM-40/4/03-G/B
.
NOTE FOR SWITZERLAND
●
The NIBT standard does not requires DC terminals to be protected against direct fault currents.
