5
Warnings:
·
Please strictly follow the installation instructions . Improper installation may cause electric
shock or Death.
·
Warranty will be void in case of damage due improper installation.
·
Power should not exceed stated range (rated voltage 90-264V, frequency 47-63Hz),
(Power AC220V must be switched off when wiring, make sure wires are connected
properly. To avoid damage, please do not install lamps right above objects such as stoves,
gas and exhaust channels or any hot objects.
·
Ensure only qualified personnel install ,operate and maintain the Streetlamp.
Maintenance
1.change the power supply module, if the whole lamp does not work.
2.change the light source module(needs to be done by a qualified person), if a single LED
does not work.
3.Do not clean the lamps with volatile chemicals such as thinners (acetone) or gasoline,
doing so will damage the lamps and affect the lifespan.
Possible failures and solutions:
Failure Reasons
Solutions
Power input terminals are
not connected properly
Re-connect to the power
input terminals
Power fuse failed
Change fuse
All the LEDs do not light up
Power output socket is
not connected properly
Re-connect to the output socket
LED flicker
Power supply failed
Change power supply
a set of LED is dim
Power supply failed
Change power supply or
LED module
Few LED do not light
LED damaged
Change LED Module
