Water Monitoring System
User Manual
Page
38
of 82
Ver. 1.1 – Revision March 2022
Figure 6.3: Alarm screen
6.8 Log & data export
NOTICE
IMO resolution MEPC.259(68) & 340(77) stipulates that the logging
function must not substitute data recording and processing.
Logged data is typically sent to the manufacturer for diagnostic
purposes.
All measurement data and most relevant system data is logged and saved. It
can be exported in an editable format to the SD card located in the PLC. The
SD card can then be inserted into a PC and the files copied to a folder on
the PC. The data can then be used or sent to Green Instruments on request.
Login and open the System Settings screen. Refer to Figure 5.2. Press the
system settings button and then press the Export Data Log button and wait
for the display message “Export Successful”.
Note: Always remember to reinsert the SD card in the PLC after you have
copied the files to the PC.
